Solid Rockwall Concrete and MasonrySolid Rockwall Concrete and Masonry(972) 961-1232
Solid Rockwall Concrete and Masonry
(972) 961-1232Get an estimate

Masonry Contractor in Mesquite, TX - Brick and Stone Repair That Blends In

Solid Rockwall Concrete and Masonry is a masonry contractor based in Rockwall that works in Mesquite, TX, repairing brick, mortar joints and chimneys and building walls, walkways and outdoor kitchens from the footing up.

Get an estimate(972) 961-1232
Gray interlocking pavers cover a broad driveway beside a house, bordered by dark edging and a concrete curb.

How Mesquite houses and yards shape our masonry work

Mesquite is a short drive from where we're based in Rockwall, and the masonry calls from here are the same kind we get across the cities around us, like Garland and Plano: mortar joints that crumble when you rub them, cracks running up a brick wall, a chimney that needs work, or a yard that's ready for a new wall or walkway. Some houses here are older brick and some are newer builds, and both need someone who matches what's already there instead of patching over it.

On most jobs here, the brick you see is only half the story. If a wall is cracking, I want to know what the footing under it is doing and where the yard's water goes, because fixing the face without that only buys a few years.

Masonry services we bring to Mesquite homes

Here's the masonry work we do in Mesquite, from fixing what's worn out to building something new in the yard. A job starts with me on site, looking at the brick, the joints and the ground under them, because the right fix depends on what's actually failing. Repairs come first when a wall or chimney is letting water in, and new walls, walkways and outdoor kitchens get planned around the footing, drainage and how we'll get material into your yard.

  • Foundation repair

    When a crack runs up a brick wall in a stair-step line, the trouble usually starts below it. We look at the footing first and fix the cause before we patch any brick.

    Explore service

  • Chimney repair

    Chimneys sit exposed on every side, so loose bricks and open joints near the top are common. We rebuild the damaged rows of brick and match the mortar so the repair blends in.

    Explore service

  • Tuckpointing

    Older brick walls often have joints worn thin across the whole face, not just in one spot. We grind out the bad mortar and repoint it, matching color and joint shape.

    Explore service

  • Brick repair

    Cracked, chipped or loose bricks show up around windows, corners and garage openings on a lot of houses. We cut out the bad ones and set replacements that match in size, color and texture.

    Explore service

  • Driveway pavers

    A plain concrete driveway that's cracked or tired can be swapped for pavers set on a packed base. We dig out, build the base and lay the pavers so they sit flat and tight.

    Explore service

  • Retaining wall construction

    Sloped yards often need a wall to hold the dirt back. We build it on a solid footing with drainage behind it, because trapped water is what pushes walls over.

    Explore service

  • Masonry restoration

    Older brick or stone that's stained, cracked and patched over the years can be brought back without tearing it down. We clean, repair and repoint it with materials that suit the original.

    Explore service

  • Fireplace installation

    A new fireplace or a rebuilt firebox can anchor a living room or a back patio. We build it from the hearth up and follow the maker's instructions for any insert you choose.

    Explore service

  • Stone veneer installation

    Stone veneer dresses up a plain front wall or column without the weight of full stone. We prep the wall with backing and drainage so moisture doesn't get trapped behind it.

    Explore service

  • Concrete block walls

    Block walls work for privacy along a back fence line or around a utility area. We set them on a poured footing and add steel and grout inside where the wall needs strength.

    Explore service

  • Foundation block wall installation

    Additions, garages and outbuildings can sit on a block foundation wall instead of a slab edge. We lay it level and square on a sound footing, because everything above depends on it.

    Explore service

  • Outdoor kitchen masonry

    A backyard cooking area needs a sturdy base and counters built to handle heat and the outdoors. We build the block or brick structure and finish it in stone or brick to match your house.

    Explore service

  • Walkway construction

    Front walks that have sunk or cracked are a trip hazard and the first thing guests see. We pack a solid base and lay brick, stone or pavers so the new walk sits flat.

    Explore service

  • Brick wall installation

    A brick wall along a front yard or around a patio should match the house and stand straight. We pour the footing first, then lay the brick dead straight with mortar that suits it.

    Explore service

  • Stone masonry

    Natural stone suits garden walls, steps, columns and beds when you want something that looks settled into the yard. We pick and fit each stone by hand and set it on a solid base.

    Explore service

  • Brick pointing

    When only a few joints have cracked or dropped out, a whole wall doesn't need redoing. We clean out those joints and fill them with mortar matched to the rest, so the patch doesn't show.

    Explore service

What brick, stone and block work looks like up close

These photos show the kinds of masonry we build and repair, from mortar joints and chimneys to walls and walkways. They're examples of the trade, so ask me about your own project when I come out.

  • A broad multicolored paver patio and tiered stone retaining wall sit outside a white stucco house.

  • Tan stone steps cross a landscaped garden from a flagstone patio, bordered by gravel and shrubs.

  • A stone fire pit and low retaining walls furnish a paved patio with wicker seating outside a brick house.

Working in Mesquite: permits, inspections and what moves the price

Mesquite runs its own permit office and inspections, and that shapes how we plan a masonry job here. Here's who signs off, what you can check about us and what drives the cost.

Who issues permits and how inspections set timing

In Mesquite, building permits come from the city's Building Inspection division, so that's whose call it is whether your job needs one. Before we start, we check with the city for your address, and when a permit is needed we handle the application and inspections for you. That way you're not the one on hold or waiting on the inspector.

Inspections are what move the calendar. Permitted work has to stay open and visible until the city approves it, so we leave a footing or wall uncovered until it's checked and plan the crew around that. Anyone pulling a permit here first applies to the city for a Professional License, so it's fair to ask any contractor you're weighing whether they have one.

  • A gas line to an outdoor kitchen is inspected under a plumbing permit.
  • Each trade pulls its own permit, and the general contractor owns the building permit.
  • The city has a grading permit for filling, grading or digging a lot.

What moves the price and the schedule

What moves the price is mostly what we find once we're looking at it: how far a crack or a bad joint runs, how much has to come out before new work goes in, and how hard it is to match your brick or stone. Access counts too, since work behind a fence or up on a chimney takes longer to reach and set up.

On new builds like walls and walkways, the size, the footing and the material you pick set most of the cost. The schedule turns on whether a permit is needed, when inspections land and how long mortar or concrete needs before the next step. Your own number comes from the estimate, once I've seen the job in person.

  • Matching old brick can mean hunting it down or blending, which adds cost.
  • Damage behind the brick often only shows once the old mortar comes out.
  • Tearing out an old wall or walk adds hauling to the price.

Get a free on-site masonry estimate in Mesquite

Call (972) 961-1232 or send the form, and we'll reply within one business day to set a time. I'll come out to your Mesquite home myself, look at the job and give you a free estimate on site, with no obligation to hire us.

(972) 961-1232

What we run into on Mesquite houses and yards

Most masonry problems on houses around here come down to a handful of things that show up again and again on brick walls, fences and yards. Here's what they are and what each one usually means for the fix.

  • Mortar joints going sandy

    When you can scrape a joint with a key and sand falls out, the mortar is wearing out. That's normal on brick that's been up a while. If it's a few spots we repoint those, and if it's the whole wall we talk about redoing every joint.

  • Stair-step cracks in brick walls

    A crack that zigzags up through the mortar joints usually means something under the wall moved. Some are old and settled, and some are still moving. I check the footing before saying which, because filling a crack that's still moving just means it opens again.

  • Leaning brick and block fences

    Plenty of lots we see have a brick or block fence along the back or side. When one leans or a section cracks, the real question is whether to fix that stretch or rebuild it, and I'll give you a straight answer on which one makes sense.

  • Low spots and drainage

    Some Mesquite lots sit in a mapped floodplain, and plenty more just have low spots where water sits after rain. Water against a wall or under a walk is what undermines it, so on any yard job we look at where the water goes and build drainage in.

  • Loose brick at chimney tops

    A chimney is the most exposed brick on a house, and the top few rows are usually the first to loosen. You often can't see that from the yard, so we check it up close when there's a leak or loose brick near the roofline.

Why hire us for masonry work in Mesquite

I've run this business since 2023, and before that I did brick and stone side jobs for neighbors in Rockwall until the calls kept coming. Here's what that means on your job.

Getting the part you can't see right

Masonry that fails early usually fails underneath. A wall without a real footing, a walk on loose fill or a joint patched over a crack that's still moving can look fine the day the crew leaves and wrong a couple of years later. So I spend the first part of a visit looking under and behind the brick, not just at its face.

On repairs, that means finding the joint or brick that's actually failed and fixing that, with mortar matched so the patch is hard to pick out. On new walls and walkways, it means building the footing or base right before anything goes on top. A job should still look good years from now, not just the day we leave, and that's where it's decided.

  • I price it and work it

    I'm the one who comes out to look at your job and give you the estimate. Once we start, I'm on site working alongside our crew, so the person who priced the job is the one making the calls while it gets built.

  • A straight yes or no

    If a crack is old and stable or a few bad joints don't justify redoing a wall, I'll say so. I'd rather tell you a job isn't needed than sell you one, and you'll get a clear yes or no on what your house needs now.

  • Mortar and brick that match

    We're best known for mortar and brick repair that blends in. That means matching mortar color, joint shape and the brick itself to what's already on your house, so a repaired section doesn't stand out from the street.

  • Licensed, insured, satisfaction guaranteed

    Your satisfaction, guaranteed. That's the promise we put on our work, and we're fully licensed and insured. To get started, call (972) 961-1232 or send the form, and I'll come out to look at your Mesquite job.

Common questions about masonry work in Mesquite

Here are straight answers on permits, fences, floodplains, codes and cost for masonry work in Mesquite. If your question isn't here, ask me when I come out to look at the job.

Does masonry work need a permit in Mesquite, TX?

It can, because Mesquite requires permits for new construction, repairs, remodels and demolitions, and the city's permit FAQ only names cosmetic work like paint, wallpaper, carpet, cabinets or trim as needing none. Masonry isn't among those, so we check with the city for your address before we start and handle the permit when one's needed.

How do I pull a permit myself as a homeowner in Mesquite?

You can if you own the house, live in it and have it homesteaded through the Dallas Central Appraisal District. You first apply for the city's Professional License, which is free for a homeowner working on their own homestead, then file through Citizen Self Service, the city's online permit system, as laid out on the city's permit process page. If you'd rather not deal with it, that's part of what we handle.

Do I need a permit to rebuild part of a brick fence in Mesquite?

Under the city's rules, replacing less than half of a fence with the same material in the same spot needs no permit, while moving any part of it or changing the material needs a permit application. Whether your brick or block wall counts as a fence is something we confirm with the city before we start.

How do I find out if my Mesquite home is in a FEMA floodplain?

Look up your address on FEMA's floodplain map service center, which the city's floodplain page points to, or call the city's stormwater section at 972-329-8537. It's worth checking before a retaining wall, walkway or other yard project, since the city's Engineering Division manages drainage and the floodplain.

What building code applies to masonry on a house in Mesquite?

Mesquite builds houses to the International Residential Code, with local amendments the city adopted for homes. Questions on codes, inspections or what to submit go to the city's inspection office at 972-216-6212, and we build to what the inspector checks for on your job.

How much does masonry work cost in Mesquite, TX?

Masonry cost in Mesquite comes down to the size of the job, how much old material has to come out and how hard your brick or stone is to match. Local extras can add to it, like a permit when the city requires one, drainage on a low lot or a separate plumbing permit for a gas line to an outdoor kitchen. I give you the number for your job after I've looked at it in person.

Service areas

We're based in Rockwall and work across the cities around it, including Mesquite, Rowlett, Garland, Heath and Royse City. If your city isn't listed, call (972) 961-1232 or send the form to ask.

Ask about your location
(972) 961-1232Get an estimate