Solid Rockwall Concrete and MasonrySolid Rockwall Concrete and Masonry(972) 961-1232
Solid Rockwall Concrete and Masonry
(972) 961-1232Get an estimate

Masonry contractor in Royse City, TX - brick and stone repairs that blend in

Solid Rockwall Concrete and Masonry is a masonry contractor based in Rockwall that works in Royse City, repairing cracked brick and worn mortar and building new walls, walkways and outdoor masonry for homeowners.

Get an estimate(972) 961-1232
Outdoor kitchen with a stone veneer island, black countertop, and built-in stainless steel grill on a paved patio.

What masonry work looks like in Royse City

Royse City is a short drive east of us in Rockwall, and the calls we get here sound a lot like the ones closer to home. It's a brick front with joints going soft, a crack running up from a window corner, a fence column that's started to lean, or a backyard that's ready for a walkway, a seat wall or an outdoor kitchen. It's the same work we do in Fate on the way out and over in Travis Ranch, and we bring the same crew and the same habits.

Most houses we see here wear brick veneer, one layer of brick tied to the frame behind it. That shapes the job, because a repair has to blend into brick that's already there, and anything new needs a solid footing before the first row of brick goes down.

Masonry services we bring to Royse City homes

In Royse City we offer all sixteen of our masonry services, from fixing a few crumbling joints to building new walls, walkways and outdoor kitchens. Every job starts with me on site, working out what's actually wrong before I tell you what it needs. We plan the work from the bottom up, with the footing and base first and the brick or stone you see last, because that order is what keeps a wall straight and a walk flat.

  • Foundation repair

    Stair-step cracks in brick and doors that suddenly stick usually mean the footing under the house has moved. We find where, then fix the support before we patch what shows.

    Explore service

  • Chimney repair

    A chimney's mortar and crown, the cap on top, wear out first, and once they crack water gets into the brick below. We rebuild the worn part and close the top back up.

    Explore service

  • Tuckpointing

    When joints on a brick front go sandy or recessed, water gets behind them. We grind out the failed mortar and pack new mortar matched to the old color.

    Explore service

  • Brick repair

    A cracked or spalled brick, one with its face flaking off, lets water into the wall around it. We cut out the damaged brick and set a matched one, so the repair blends in.

    Explore service

  • Driveway pavers

    Paver driveways sink and spread when the base underneath was skimped. We dig out, pack a firm base in layers and lock the edges, so the pavers carry your car without rutting.

    Explore service

  • Retaining wall construction

    Sloped yards need a wall that holds the dirt back and lets water out. We build on a solid footing with drainage behind it, because that's what keeps a wall from leaning.

    Explore service

  • Masonry restoration

    Older brick and stone often carries years of patches in the wrong mortar and color. We take out the bad repairs, fix what's under them and even out the wall's look.

    Explore service

  • Fireplace installation

    A new fireplace has to sit on its own footing and keep heat away from the wood framing around it. We build the base, firebox and surround in brick or stone.

    Explore service

  • Stone veneer installation

    Stone veneer, thin stone set over a wall, dresses up a plain front or column. We prep the wall behind it to shed water first, because that's where veneer jobs usually fail.

    Explore service

  • Concrete block walls

    Block walls make good screen walls, garden walls and backs for outdoor kitchens. We set them on a footing and fill the hollow cores with steel and grout where the wall needs strength.

    Explore service

  • Foundation block wall installation

    Additions, garages and crawl spaces often sit on block foundation walls. We lay them level and square on a poured footing, because every row above depends on the first one being right.

    Explore service

  • Outdoor kitchen masonry

    A grill island is a wall like any other, so it needs a footing. We build the base in block, face it in brick or stone and leave room for gas and power.

    Explore service

  • Walkway construction

    Walkways that heave or hold puddles usually have a thin base. We dig down, build the base up in layers and set brick, stone or pavers sloped to shed water.

    Explore service

  • Brick wall installation

    Brick fence walls and columns go up between yards and along frontages. We pour a proper footing and build them straight, because a wall that leans gets paid for twice.

    Explore service

  • Stone masonry

    Natural stone suits walls, steps and columns where you want a heavier, older look. We fit each stone by hand and set the work on a footing, so it stays put.

    Explore service

  • Brick pointing

    Hairline gaps between brick and mortar let water in long before a wall looks bad. We point the joints, filling them fresh and tooling them smooth, to close the gaps before they spread.

    Explore service

Brick, stone and block work of the kind we do

These photos show the kinds of masonry we build and repair, from matched mortar joints to stone walls and paver walkways. Tap any of them for a closer look at the work.

  • A broad multicolored paver patio and tiered stone retaining wall sit outside a white stucco house.

  • Tan stone steps cross a landscaped garden from a flagstone patio, bordered by gravel and shrubs.

  • A stone fire pit and low retaining walls furnish a paved patio with wicker seating outside a brick house.

Working in Royse City: permits, registration and what moves the price

Royse City has its own building rules, and they shape when a masonry job can start. Here's how the permit side works, what you can check about whoever you hire, and what moves your price.

Permits and contractor registration in Royse City

In Royse City, building permits come from the city's Building Department, and the city wants the permit in hand before any improvement or alteration to a property. For masonry, that means any permit your job needs comes before we dig a footing or set a stone. When the city reviews plans, that review adds a wait to the front of the schedule, so we apply as soon as you've said yes.

The city also requires a contractor to be registered with it to get a permit or be listed on one. For general contractors, that registration costs $50 and runs a year from the day it's issued. So ask whoever you hire whether they're registered with Royse City right now, because one who isn't can't pull your permit and the job sits until that's fixed.

  • The city's permit rule covers improvements and alterations, not just new houses.
  • Plan review adds days up front, so apply early, not the week before.
  • Ask your contractor to confirm they're registered with the city this year.

What we take care of and what moves price

Before work starts, we check with the city or county office for your address, because the city works out its addressing with Collin, Hunt and Rockwall counties and the right office depends on where your address falls. When a permit is needed, we handle the application and the inspections, so you're not chasing paperwork. The schedule mostly turns on that review and how big the job is.

Price comes down to how big the job is, whether it's a repair or something new, the brick or stone you pick and what's underneath, like a footing we have to dig and pour or a cracked wall whose support needs fixing first. Access counts too, because a narrow side gate means more carrying by hand. Your estimate puts a number on all of it.

  • We confirm which office covers your address before we plan anything.
  • When a permit's needed, we file it and book the inspections.
  • New footings and hard-to-match brick usually move the price the most.

Get a free masonry estimate at your Royse City home

Call (972) 961-1232 or send the form, and we'll reply within one business day to set a time. I'll come out to your place in Royse City, look the job over and give you the estimate, free and with no obligation to go ahead.

(972) 961-1232

What we see on houses and yards around Royse City

Most masonry calls start with something a homeowner noticed, like a crack, a crumbling joint or a wall that's started to lean. These are the things we look for on houses and yards like yours.

  • Brick fronts with tired joints

    Plenty of houses here have brick on the front or all the way around. The brick outlasts the mortar, which goes sandy or pulls away from the edges first, so we check how deep that goes before choosing between a few patches and a full wall.

  • Cracks with a cause underneath

    Stair-step cracks through brick, or a gap opening at a window corner, usually mean something under the wall moved. Filling the crack alone usually just hides it for a while. We look at the footing and support first, then repair the brick to match.

  • Old patches that don't match

    Many walls we look at already carry an earlier repair in mortar that's the wrong color or too hard for the brick around it. Hard mortar can make the brick crack instead of the joint, so we cut those patches out and redo the joints the right way.

  • Yards built for outdoor living

    Backyards get patios, grill islands, fire pits and seat walls, and every one of those is a wall that needs something solid under it. When the footing gets skipped, the work tends to settle and crack later on. We dig and pour the footing before any brick or stone goes on.

  • Walks, edges and fence columns

    Front walks, paver edges and brick fence columns take foot traffic, sprinkler spray and runoff off the roof. The ones that fail usually had a thin base or no real footing. We fix what's underneath first, because resetting brick on the same weak bed just buys a little time.

How we work on every Royse City masonry job

We're a small Rockwall outfit that went full time in 2023, and the way we work comes from how I learned the trade. Here's what that means when you hire us.

The owner gives the estimate and works the job

I come out to look at every job myself and give the estimate, and I'm on site working next to our crew while it gets built. So the person who told you what your wall needs is the one making sure it gets done that way. Nothing gets lost between a salesman and the crew, because there isn't one.

I started out doing brick and stone side jobs for neighbors in Rockwall and learned the trade on real walls, next to older masons, fixing whatever I found. That's why I look first at the part you can't see: the footing, the base and the joint that's actually failed. A job should still look right years from now, not just the day we pack up.

  • Fully licensed and insured

    We're fully licensed and insured, so you're not taking on the risk of an uninsured crew working on your house. If you want to see the coverage before we start, ask at the estimate and I'll show you the paperwork.

  • Mortar matched to your wall

    A repair that stands out can look worse than the damage did. We match mortar color, texture and joint shape to what's already on your house, and find brick or stone as close to yours as we can, so the fixed section blends in.

  • Footings and base go in first

    Walls and walks usually fail from the ground up. We dig, pack and pour what goes under the work before anything goes on top, even though it's the part you'll never see again once we're done.

  • A straight answer on what's needed

    If your job doesn't need doing yet, I'll tell you, and if a small repair will do, I won't sell you a big one. Your satisfaction, guaranteed. Call (972) 961-1232 or use the form to set up a visit.

Questions about masonry permits and costs in Royse City

Most of what homeowners ask us here comes down to permits, timing and price. These answers cover what the city's rules mean for a masonry job, and what changes what you'll pay.

How do I get a permit for a brick or stone fence in Royse City?

You get it from the city before the fence goes up, because the city's permit FAQ says every fence needs a permit. That covers a brick or stone fence the same as any other, so the permit has to be issued before we dig the footings for the columns. When we're building it, we take care of the application.

Do I need a permit to add a stone or brick front to my house in Royse City?

Yes, the city lists adding siding or facade as remodel work that needs a remodel permit. A new stone or brick front on an existing house is facade work, so the permit comes before the first stone goes on, and we go over the details with the city when we take on your job.

How long does it take to get a permit and an inspection in Royse City?

The city asks you to allow up to 10 business days for plan review, and an inspection can be set for the next day when the request is in by 4 pm. Inspections are booked through the city's MyGov portal or by email, and the Building Inspection Department answers questions at (972) 524-4710. When we hold the permit, we book the inspections.

How much does masonry work cost in Royse City?

It's priced job by job after I've seen it, because the things that decide it, like a footing that has to go in, old brick that's hard to match or how much of a wall has really failed, only show up once you're standing at the wall. Pointing a few bad areas usually costs far less than rebuilding a section, so I'll tell you which one you actually need. Call (972) 961-1232 or send the form to set up a visit.

Service areas

We're based in Rockwall and work in Royse City and the cities around it, including Fate, Heath, Rowlett and Garland. Don't see your city listed? Call (972) 961-1232 or send the form and ask.

Ask about your location
(972) 961-1232Get an estimate